結構健康診斷技術及應用
Computational Technique and Its Application for Structural Health Moni
| 節 | 週二 |
|---|---|
5 13:20–14:10 | 結構健康診斷技術及應用 EB402（光復） 3 節連堂 |
6 14:20–15:10 | |
7 15:30–16:20 |
* 根據陽明交大上課時間表所列
本課程教學目標主要為解說近年來蓬勃發展之結構健康診斷核心技術及其應用、培養同學進一步於相關領域研究之專業分析技巧與能力,課程主要可分為三大部分 一、Signal Processing Techniques: 此部分將安排於課程之前段,首先針對訊號分析與處理之理論進行回顧,使同學建立修習核心課程之基礎。 二、Computational Simulation Techniques for Structural Health Monitoring: 此部分將介紹如何利用數值模型與結構健康診斷技術結合。內容主要包含傳統有限元素模擬、以頻譜為基礎知有限元素模擬,及損傷模擬技術。 三、Computational Methodologies for Damage Detection and Quantification: 此部分將透過時域與頻率域兩大主題介紹結構健康診斷核心技術,並將討論如何判定結構損傷程度。課程中亦將介紹實際案例供同學參考。
結構動力學、訊號處理與頻譜分析
無備註
教師未提供此項資料
出席:10% 作業:20% 期中考:35% 期末報告:35%
Signal Processing Techniques
1.Integral Transform 2.Signal Processing Issue 3.Frequency/Wave Number Analysis
- 講授：
- 8
- 實作：
- 4
Computational Simulation Techniques for Structural Health Monitoring
1. Application of Finite Element Method for Structural Health Monitoring 2. Spectral Finite Element method 3. Perturbation Methods for Damaged Structures
- 講授：
- 12
- 實作：
- 6
Computational Methodologies for Damage Detection and Quantification
1. Damage Measure Based on Energy Functional Distribution 2. Wave Propagation Techniques: Time Domain 3. Damage Indicator Technique
- 講授：
- 12
- 實作：
- 6
| 週次 | 主題 |
|---|---|
| 第 1 週 | Introduction on the development of structural health monitoring |
| 第 2 週 | Signal Processing Techniques: Integral Transform |
| 第 3 週 | Signal Processing Techniques: Signal Processing Issue |
| 第 4 週 | Signal Processing Techniques: Frequency/Wave Number Analysis |
| 第 5 週 | Signal Processing Techniques: Numerical Examples |
| 第 6 週 | Computational Simulation Techniques: Application of Finite Element Method for Structural Health Monitoring |
| 第 7 週 | Computational Simulation Techniques: Spectral Finite Element method |
| 第 8 週 | Perturbation Methods for Damaged Structures (I) |
| 第 9 週 | Mid-term Exam |
| 第 10 週 | Perturbation Methods for Damaged Structures (II) |
| 第 11 週 | Computational Methodologies: Introduction to Vibration-based Techniques |
| 第 12 週 | Computational Methodologies: Damage Measure Based on Energy Functional Distribution |
| 第 13 週 | Computational Methodologies: Damage Measure Based on Energy Functional Distribution/ Wave Propagation Techniques: Time Domain |
| 第 14 週 | Computational Methodologies: Wave Propagation Techniques: Time Domain |
| 第 15 週 | Computational Methodologies: Damage Indicator Technique |
| 第 16 週 | Practical Application Example (I) |
| 第 17 週 | Practical Application Example (II) |
| 第 18 週 | Final Presentation |
1. Gopalakrishnan, Srinivasan, Ruzzene, Massimo, Hanagud, Sathyanaraya (2011) Computational Techniques for Structural Health Monitoring Series: Springer Series in Reliability Engineering, 1st Edition. 2. I. Takewaki, M. Nakamura, S. Yoshitomi (2011) System Identification for Structural Health Monitoring
- 地點
- Room 326
- 時間
- Wednesday 14:00-17:00
- 聯絡方式
- 教師未提供此項資料